Mat Sinking Unit Washer-Extractors

Project ID: W912EE26QA024 FederalOpportunitiesSynopsis Solicitation

Overview

Agency	USACE Vicksburg District
Deadline	05/28/26
Posted	05/14/26
Estimated Value	<$250,000 (solicitation indicates Simplified Acquisition Procedures, which in most cases, applies to contracts expected to be less than $250K in value)
Set Aside	None
NAICS	423850 - Service Establishment Equipment and Supplies Merchant Wholesalers
PSC	3510 - Laundry And Dry Cleaning Equipment
Location	MS 39183 United States

Description

Primary Latest Change

MAT SINKING UNIT WASHER-EXTRACTORS

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. Solicitation Number W912EE26QA024 is being issued as a request for quote (RFQ) with the intent to issue one Firm-Fixed Price Contract. This solicitation is being issued under a Full and Open Competition. The NAICS code for this procurement is 423850 Service Establishment Equipment and Supplies Merchant Wholesalers; with a size standard of employees 125. This procurement is being conducted in accordance with regulations at FAR Part 12 Acquisition of Commercial Items and FAR Part 13 Simplified Acquisition Procedures. The U.S. Army Corps of Engineers, Vicksburg District, MVK Revetment Branch has a requirement for eleven (11) new industrial type washer-extractors to replace existing equipment. The commercial washing machines will each be delivered to the USACE Mat Sinking Unit Quarter boats. All Offerors shall submit a quote with content as specified herein. Quotes submitted without the specified content may be determined non-responsive and removed from further consideration. Offers are encouraged to review all clauses that are incorporated into this solicitation. ****SPECIAL ATTENTION SHOULD BE FOCUSED ON FAR 52.212-2 EVALUATION COMMERCIAL PRODUCTS, AS THIS CLAUSE OUTLINES THE EVALUATION FACTORS FOR THIS REQUIREMENT. **** The government intends to make one award for one firm fixed price contract. Offers for less than the required delivery will not be accepted. The Government intends to award without discussions while reserving the right to hold discussions if determined advantageous to the Government. Offerors are encouraged to provide their best proposed pricing in their initial offer.

Notes to Offerors

BIDDINGSCHEDULEMUSTBERETURNEDWITHYOURQUOTE. Quotes shall be submitted electronically via email, to: Jasmine.Lewis@usace.army.mil. For information concerning this solicitation, contact Jasmine Lewis at the above email or by phone at 601-531-5354. - You are responsible for reading all information contained in this solicitation and all attachments if any posted with it. - Offerors should check the SAM.gov web site often for modifications to this solicitation. - Offerors are responsible for ensuring their quotes arrive timely.

TECHNICAL INQUIRIES AND QUESTIONS

Technical inquiries and questions relating to this solicitation are to be submitted via Bidder Inquiry in ProjNet at (https://www.projnet.org). Offerors are encouraged to submit questions early in the advertisement process, in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary. Any questions submitted within the 72 hours window of the solicitation closing date are not guaranteed a response will be proivded. To submit and review inquiry items, prospective vendors will need to use the Bidder Inquiry Key presented below and follow the instructions listed below the key for access. The Solicitation Number is: W912EE26QA024, Quarterboat Washers Extractors The Bidder/Offeror Inquiry Key is: NA5W5C-RN9PQI

Specific Instructions for ProjNet Bid Inquiry Access

- From the ProjNet home page linked above, click on Quick Add on the upper right side of the screen. - Identify the Agency. This should be marked as USACE. - Key. Enter the Bidder Inquiry Key listed above. - Email. Enter the email address you would like to use for communication. - Click Continue. A page will then open saying that a user account was not found and will ask you to create one using the provided form. - Enter your First Name, Last Name, Company, City, State, Phone, Email, Secret Question, Secret Answer, and Time Zone. Make sure to remember your Secret Question and Answer as they will be used from this point on to access the ProjNet system. - Click Add User. Once this is completed you are now registered within ProjNet and are currently logged into the system. Bidders/Offerors are requested to review the specification in its entirety, review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry. The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800-428-HELP.

Summary (Newest Update)

Background The U.S. Army Corps of Engineers, Vicksburg District, MVK Revetment Branch is seeking to procure eleven (11) new industrial-type washer-extractors to replace existing equipment. This procurement is being conducted under a Full and Open Competition. Work Details The contract requires the delivery of eleven (11) washer-extractors as follows: - Nine (9) new, unused, identical 40-pound minimum front-load washer-extractors: - Each machine must be capable of washing a load of at least 40 pounds. - Maximum width: 32 inches; maximum depth: 43 inches. - Hard mounts required with a 6-inch steel base for each machine. - Must be compatible with detergent and bleach dispensers and allow for manual addition. - Mechanical control panels preferred; digital may be substituted if necessary. - At least four wash temperatures/settings. - Front door must lock when closed. - Standard manufacturer’s warranty effective from delivery date. - Voltage: 240V / 3 phase; made in the USA. - Two (2) new, unused Speed Queen or equivalent 60-pound minimum front-load washer-extractors: - Each machine must be capable of washing a load of at least 60 pounds. - Maximum width: 35 inches; maximum depth: 45 inches. - Hard mounts required with a 4-inch steel base for each machine. - Must be compatible with detergent and bleach dispensers and allow for manual addition. - Mechanical control panels preferred; digital may be substituted if necessary. - At least four wash temperatures/settings. - Front door must lock when closed. - Standard manufacturer’s warranty effective from delivery date. - Voltage: 240V / 3 phase; made in the USA. Period of Performance All items required shall be delivered within 60 days of contract award. Place of Performance USACE Mat Sinking Unit, 2577 Haining Rd, Vicksburg, MS, 39183

Contacts

Contact name	Jasmine Lewis
Contact email	jasmine.lewis@usace.army.mil
Contact phone	None
Secondary contact name	Dustin G. Cannada
Secondary contact email	dustin.g.cannada@usace.army.mil
Secondary contact phone	None