Special Notice of Intent to Award Brand Name Mako

Project ID: 1333MK26Q0068 FederalOpportunitiesSolicitation

Overview

Agency	Office of Marine & Aviation Operations
Deadline	05/27/26
Posted	05/21/26
Estimated Value	<$250,000 (solicitation indicates Simplified Acquisition Procedures, which in most cases, applies to contracts expected to be less than $250K in value)
Set Aside	None
NAICS	324191 - Petroleum Lubricating Oil and Grease Manufacturing
PSC	9150 - Oils And Greases: Cutting, Lubricating, And Hydraulic
Location	Pascagoula, MS USA

Description

Primary Latest Change

Special Notice

This notice of intent is not a request for competitive quotes and no solicitation package is available. However, firms that believe they can provide equipment or service that fully meets the Government's requirements may submit substantiating documentation to the identified point of contact within 5 days after publication of this synopsis. Such documentation will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. Responses can be sent via e-mail to christopher.baker@noaa.gov . A determination by the Government not to conduct a competitive procurement, based upon responses to this notice, is solely within the discretion of the Government. Oral communications are not acceptable in response to this notice. NOAA's Marine Operations Center, Acquisition Branch, intends to negotiate, on a sole source basis, under authority of FAR 6.103 other than full and open competition; with Central Alabama Training Solutions, Inc. 5100 Culver Rd. Tuscaloosa, Alabama 35401 for the following. 1.0 Purpose: This Statement of Need contains requirements for Central Alabama Training Solutions, a professional supplier of SCBA equipment, to provide equipment as Long Lead Time Material (LLTM) in support of the upcoming Drydock Availability. Material to be delivered to Pascagoula, MS by September 01, 2026. Equipment to be supplied with: operational, maintenance, and technical manuals, installation information and drawings, and similar documentation for installation, maintenance, and operation of the equipment. 2.0 References: 2.1.1 None 3.0 Government Furnished Material: None additional. 4.0 Requirements: 4.1 Procure Model # EA07H, 6000 PSI, 20.7 CFM, 460 Volt, Three Phase Electric Driven, 4 Stage Breathing Air Module, EconoAir Open Frame [complete with automatic drain valve, emergency stop button, hour meter, final stage pressure gauge, visual CO/Moisture indicator, Low Oil Pressure switch, auto start/stop air pressure switch, 15 HP motor, MK5C Grade E purifier (57,400 CF)], and Electronic CO and Moisture (CMM) Mounting System 4.2 MAKO Model # SCFS2-3HP, Two SCBA Fill, 6000 PSI Rated, Three Bank Cascade Control, Containment Style Fill Station (complete with inlet & outlet gauges, 0-6000 PSI inlet & outlet regulator, To & From bank control valves & gauges, regulated auxiliary outlet with QD, master fill valve & gauge, three fill whips with bleeder valve & control valve, bypass valve, & all interconnecting fittings for cascade operation). 4.3 Two 6000 psi ISO/DOT cylinders 10 year hydro, 2036 CF, Storage Cylinder Rack MKBVS22C2D, Breathing Air Storage System (complete with 2 cylinders with CGA-702 nuts and nipples and all interconnecting hoses for cascade operation). 4.4 All items to be new and new condition. 4.5 Compressor unit to be less than 30 in one horizonal dimension, or have components removable and able to be reinstalled without damage to the unit. 4.6 Bottle foundation and charging station to be less than 24 in one horizontal dimension. Delivery address to be: 151 Watts Ave, Pascagoula, MS, 39567

Mako Authorized Distributor Information

Thank you for your interest in MAKO Compressors. Please be advised that Central Alabama Training Solutions of Tuscaloosa, Alabama is the only authorized distributor sanctioned by us to represent our MAKO breathing air products in the municipal fire, safety and diving markets in the entire state of Mississippi. As an authorized MAKO distributor, Central Alabama Training Solutions is the only approved company for new unit sales, OEM spare parts, warranty / service for any MAKO breathing air product located within the state of Mississippi. In addition, as an authorized distributor Central Alabama Training Solutions is required to maintain MAKO certification(s) for service and warranty within their assigned area. Furthermore Central Alabama Training Solutions service technician(s) are required to renew their service certifications every five years to keep abreast of current product and maintenance procedures. If you have any questions please do not hesitate to contact us. All responsible sources may submit a Capability Statement in accordance with the solicitation, which shall be considered by the agency if received on or before 1600 PM PDT on June 28, 2026. The Capability Statement must contain material in sufficient detail to allow NOAA to determine if the party can meet all of the requirements. All electronic correspondence shall have the subject line read:

Announcement Number

1333MK26Q0068

Project Title

NOAA Ship Gordon Gunter SCBA refill station NOAA's Marine Operations Center, Acquisition, Accountability, and Analysis Branch requires that all contractors doing business with this office be registered with the System for Award Management (SAM). No award can be made to a company not registered in SAM. For additional information and to register in SAM, please access the following web site: www.sam.gov.

Summary (Newest Update)

Background NOAA's Marine Operations Center, Acquisition Branch, intends to negotiate on a sole source basis with Central Alabama Training Solutions, Inc., located at 5100 Culver Rd, Tuscaloosa, Alabama 35401. Central Alabama Training Solutions is recognized as the only authorized distributor of MAKO breathing air products in Mississippi, providing new unit sales, OEM spare parts, and warranty/service for these products. The goal of this contract is to procure Long Lead Time Material (LLTM) to support the upcoming Drydock Availability. Work Details The contract requires the procurement of the following equipment: 1. Model # EA07H Breathing Air Module: 6000 PSI, 20.7 CFM, 460 Volt, Three Phase Electric Driven, 4 Stage Breathing Air Module with features including an automatic drain valve, emergency stop button, hour meter, final stage pressure gauge, visual CO/Moisture indicator, Low Oil Pressure switch, auto start/stop air pressure switch, and a MK5C Grade E purifier (57,400 CF). 2. MAKO Model # SCFS2-3HP Fill Station: Two SCBA Fill stations rated at 6000 PSI with a Three Bank Cascade Control and Containment Style Fill Station including inlet & outlet gauges and all necessary fittings for cascade operation. 3. Two 6000 psi ISO/DOT cylinders with a Storage Cylinder Rack MKBVS22C2D for Breathing Air Storage System including all interconnecting hoses for cascade operation. All items must be new and in new condition. The compressor unit must not exceed 30 inches in any horizontal dimension or have components that can be removed and reinstalled without damage. The bottle foundation and charging station must be less than 24 inches in one horizontal dimension. Period of Performance The period of performance for this contract is from May 28, 2026 to November 6, 2026. Place of Performance The delivery address for the equipment is 151 Watts Ave, Pascagoula, MS 39567.

Contacts