Capscrews

Project ID: SPMYM326Q8011 FederalOpportunitiesSynopsis Solicitation

Overview

Agency	DLA Land and Maritime
Deadline	03/27/26
Posted	03/13/26
Estimated Value	Not Provided
Set Aside	Small Business
NAICS	332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
PSC	5305 - Screws
Location	Kittery, ME United States

Description

Primary Latest Change

Summary

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, using Simplified Acquisition Procedures found at FAR 13 as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov. The RFQ number is SPMYM326Q8011. This solicitation documents and incorporates provisions and clauses in effect through FAC 2026-01 and DFARS Change Notice 20251110. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at this address: https://www.ecfr.gov and https://www.acquisition.gov/content/list-sections-affected and http://www.acq.osd.mil/dpap/dars/change_notices.html. The FSC Code is 5305 and the NAICS code is 332722. The Small Business Standard is 600. This requirement is being processed utilizing 100% Small Business Set-Aside Evaluation criteria is Lowest Price Technically Acceptable (LPTA). PPIRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104. Offerors are required to submit descriptive literature to show how their quotation meets the required specifications. Failure to provide this information may result in your quotation being determined technically unacceptable. The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing: 0001 HEX HEAD CAP SCREW 24 EA __________ ___________ HEX HEAD CAP SCREW, 0.500-13UNC-2A X 6.000 IN. LG. MFR IAW ASTM A354-17 GRADE BC(MOD). MOD IS MOD IS ZINC PLATING TO

COATING THICKNESS OF 1/6 THE ALLOWANCE

AS DEFINED IN ANSI-Bl.1-2003. NOTE: ASTM A354 REVISIONS 2007 & 2011 ARE ACCEPTABLE;

CERTIFICATIONS ARE TO DELINATE REVISION

SUPPLIED. MA T'L IS STEEL. 0002 HEX HEAD SFL LKG CAP SCREW 32 EA __________ ___________ HEX HEAD SLF LKG CAP SCREW, 0.500-13UNC-2A X 5.000 IN. LG. MFR IAW ASTM A354-17 GRADE BC(MOD). MOD IS MOD IS ZINC PLATING TO BE IA

THICKNESS OF 1/6 THE ALLOWANCE AS DEFINED IN

ANSI-Bl.1-2003. NOTE: ASTM A354 REVISIONS 2007 & 2011 ARE ACCEPTABLE; CERTIFICATIONS ARE TO DELINATE REVISION SUPPLIED. MAT'L IS STEEL. SLF LKG IA W MIL-DTL-18240F AMEND 1 TYPE ANY. MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED. SIDE LOCATION IF NECESSARY). 0003 HEX HEAD CAP SCREW 48 EA __________ ___________ HEX HEAD CAP SCREW, 0. 750-1 0UNC-2A X 4.250 IN. LG. MFR IA W ASTM A354-17 GRADE BD. MAT'L IS STEEL. 0004 HEX HEAD SFL LKG CAP SCREW 24 EA __________ ___________ HEX HEAD SLF LKG CAP SCREW, l.250-12UNF-2A X 4.750 IN. LG. MFR IAW ASTM A354-17 GRADE BC. NOTE: ASTM A354 REVISIONS 2007 & 2011 ARE ACCEPTABLE; CERTIFICATIONS ARE TO DELINATE REVISION SUPPLIED. MAT'L IS STEEL. SLF LKG IAW MIL-DTL-18240F AMEND I TYPE ANY. MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED. SIDE LOCATION IF NECESSARY). 0005 HEX HEAD CAP SCREW 36 EA __________ ___________ HEX HEAD CAP SCREW, l.250-12UNF-2A X 2.625 IN. LG. MFR IAW ASTM A354-17 GRADE BC. NOTE: ASTM A354 REVISIONS 2007 & 2011 ARE ACCEPTABLE; CERTIFICATIONS ARE TO DELINATE REVISION SUPPLIED. MAT'L IS STEEL. 0006 SOCKET HEAD SLF LKG CAP SCREW 24 EA __________ ___________ SOCKET HEAD SELF-LOCKING CAP SCREW, 0.500-13UNC-2A X 1.000 IN. LG. MFR IAW MIL-DTL-1222J TY II. MAT'L IS NICUAL, QQ-N-286G. SLF LKG IAW MIL-DTL-18240F AMEND 1 TYPE ANY. MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL

BE PLACED ON THE HEAD OF THE FASTENER

(TOP PREFERRED. SIDE LOCATION IF NECESSARY). 0007 HEX HEAD CAP SCREW 60 EA __________ ___________ HEX HEAD CAP SCREW, 0.750-10UNC-2A X 4.2500 IN. LG. MFR IAW ASTM A354-19 GRADE BD(MOD). MOD IS MOD IS ZINC PLATING TO BE IAW ASTM B633-19 SC-2, TYPE-II. MAT'L IS STEEL. 0008 SOCKET HEAD SLF LKG CAP SCREW 7 EA __________ ___________ SOCKET HEAD CAP SCREW, 0.500-20UNRF-3A X 3.750 IN. LG. MFR IAW FF-S-86J TY VI. MAT'L IS HEAT AND CORROSION-RESISTANCE STEEL, A286. DRILL HEAD IAW FF-S-86J, PARA 3.5.2, FIGURE 2 AND TABLE 1. 0009 HEX HEAD CAP SCREW 8 EA __________ ___________ HEX HEAD CAPSCREWS 3/4-10UNC-2A X 2-1/2" LONG, MIL-DTL-1222J TYPE-I. MATERIAL SHALL BE ALLOY STEEL GRADE-8. NO COATING ALLOWED. 0010 HEX HEAD CAP SCREW 40 EA __________ ___________

EXACT SAME AS ITEM 0009

0011 SOCKET HEAD CAP SCREW 4 EA __________ ___________ SOCKET HEAD CAPSCREWS, 0.50-13UNC-3A X 5.50 LONG MIL-DTL-1222J TY-II. MATERIAL

REQUIRED TO BE NICUAL QQ-N-286G GRADE-500

ANNEALED & AGE HARDENED. 0012 SOCKET HEAD CAP SCREW 20 EA __________ ___________

EXACT SAME AS ITEM 0011

0013 DATA REQUIREMENTS 1 EA ___NSP____ ___NSP_____ A001 EXHIBIT A, SEQ A001

SEE EXHIBIT A SEQ A001

CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE) 0014 DATA REQUIREMENTS 1 EA ___NSP____ ___NSP_____ A002 EXHIBIT A, SEQ A002

SEE EXHIBIT A SEQ A002

CDRL DI-MISC-80678 (CERTIFICATION / DATA REPORT) NOTE: OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 252.204-7016, AND 252.204-7019 AND INCLUDE THE COMPLETED PROVISIONS WITH THEIR OFFER.

FAR CLAUSES AND PROVISIONS

52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements 52.204-7, System for Award Maintenance 52.204-9, Personal Identity Verification of Contractor Personnel 52.204-10

Reporting Executive Compensation

52.204-13, SAM Maintenance 52.204-19, Incorporation by Reference of Representations and Certifications 52.209-5, Certification Regarding Responsibility Matters (OVER SAT) 52.209-6

Protecting the Government's Interest

52.209-10, Prohibition on Contracting with Inverted Domestic Corporations 52.211-14, Notice of Priority Rating 52.211-15, Defense Priority And Allocation Requirements 52.212-1, Instructions to Offerors - Commercial Products and Commercial Services 52.212-4, Contract Terms and Conditions Commercial Items 52.219-1 Alt 1 Small Business Program Representations (OVER 10K) 52.219-6

Notice of Total Small Business Set-Aside

52.219-16

Liquidated Damages-Subcontracting Plan

52.219-28

Post-Award Small Business Program Representation

52.222-3

Convict Labor

52.222-19

Child Labor

52.222-35

Equal Opportunity for Veterans

52.222-50

Combating Trafficking in Persons

52.223-11

Ozone Depleting Substances

52.225-1

Buy American-Supplies

52.225-3

Buy American-Free Trade Agreements

52.225-5

Trade Agreements

52.225-13

Restriction on Certain Foreign Purchases

52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving 52.232-33

Payment by EFT-SAM

52.232-34 Payment by EFT-Other than SAM 52.232-36

Payment by Third Party

52.232-39, Unenforceability of Unauthorized Obligations 52.232-40 Providing Accelerated Payments to Small Business Subcontractors 52.233-2 Service of Protest 52.233-3, Protest After Award 52.233-4, Applicable Law for Breach of Contract Claim 52.242-13 Bankruptcy 52.242-15 Stop Work Order 52.243-1, Changes Fixed Price 52.246-1, Contractor Inspection Requirements 52.247-34, F.O.B-Destination 52.252-1 Solicitation Provisions Incorporated by Reference 52.252-2 Clauses Incorporated by Reference 52.253-1, Computer Generated Forms

DFARS CLAUSES AND PROVISIONS

252.203-7000 Requirements Relating to Compensation of Former DoD Officials, 252.203-7002, Requirement to Inform Employees of Whistleblower Rights 252.203-7005 Representation Relating to Compensation of Former DoD Officials 252.204-7003. Control of Government Personnel Work Product 252.204-7004 Antiterrorism Awareness Training for Contractors. 252.204-7008 Compliance With Safeguarding Covered Defense Information Controls 252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting (May 2024) (Deviation 2024-O0013) 252.204-7015, Disclosure of Information to Litigation Support Contractors 252.204-7016, * See Attachment for this provision. 252-204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services. 252.204-7019, *See Attachment for this provision. 252.204-7020, NIST SP 800-171 DoD Assessment Requirements 252.204-7024 Notice on the Use of the Supplier Performance Risk System 252.209-7999, Representation by Corporations regarding an Unpaid Delinquent Tax Liability 252.211-7003, Item Unique Identification and Valuation 252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations. 252.223-7006, Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials. 252.223-7008 Prohibition of Hexavalent Chromium 252.225-7001 Buy American and Balance of Payments Program 252.225-7002 Qualifying Country Sources as Subcontractors 252.225-7048, Export Controlled Items 252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region - Representation 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region 252.231-7000, Supplemental Cost Principles. 252.232-7003, Electronic Submission of Payment Requests 252.232-7006, Wide Area Workflow Payment Instructions 252.232-7010, Levies on Contract Payments 252.243-7001, Pricing of Contract Modifications 252.243-7002, Requests for Equitable Adjustment 252.244-7000, Subcontracts for Commercial Items 252.247-7023, Transportation of Supplies By Sea Note: Vendor shall list the country of origin for each line item. DLAD CLAUSES AND PROVISIONS (See Attachment for Full Text) 5452.233-9001, Disputes: Agreement to Use Alternative Disputes Resolution DLA PROCUREMENT NOTES (See Attachment for Full Text) C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016) C03 Contractor Retention of Supply Chain Traceability Documentation (MAR 2023) C14 Repackaging or Relabeling to Correct Deficiencies (AUG 2017) C20 Vendor Shipment Module (VSM) (AUG 2017) E05 Product Verification Testing (JUN 2018) G01 Additional Wide Area Workflow (WAWF) Information (AUG 2017) H10 Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (FEB 2020) L06 Agency Protests (DEC 2016) L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations L31 Additive Manufacturing (JUN 2018) LOCAL CLAUSES (See Attachment for Full Text):

YM3 A1

Additional Information

YM3 C500

Mercury Control (Supplies)

YM3 C501

Correction of Certifications

YM3 C524

Controlled Industrial Material

YM3 C528

Specification Changes YM3 D2.2: Marking of Shipments

YM3 D4

Preparation for Delivery

YM3 D8

Prohibited Packing Materials

YM3 E2

Inspection and Acceptance (Destination)

YM3 E504

Notice of Constructive Acceptance Period

YM3 F500

Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard

YM3 H500

Special Provisions for Threaded Products Quoters are reminded to include a completed copy of 52.212-3 and it's ALT I if not updated in SAM. This announcement will close March 27th, 2026, at 12:00 PM EST. The Point of Contact for this solicitation is Sam Aiguier who can be reached at sam.aiguier@dla.mil. All responsible sources may submit a quote which shall be considered by the agency. System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/. If not the actual manufacturer Manufacturer's Name, Location, and Business Size must be provided. Please submit quotations via email at sam.aiguier@dla.mil Quotes also to: DLA-KME-QUOTATIONS@DLA.MIL All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC)* or Wide Area Workflow (WAWF). Please note that the Government's terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Please note, if selecting GPC, the Government does NOT utilize third party payment entities (Zelle, Venmo, Paypal, etc.) Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. *If selecting GCPC as the preferred method of payment, please be advised that per DFARS 232.7002, a receiving report MUST be entered into WAWF. ******* END OF COMBINED SYNOPSIS/SOLICITATION ********

Summary (Newest Update)

Background The Portsmouth Naval Shipyard is seeking qualified sources capable of providing various types of cap screws as part of a combined synopsis/solicitation for commercial items. This requirement is being processed under a 100% Small Business Set-Aside, emphasizing the agency's commitment to supporting small businesses. The solicitation number is SPMYM326Q8011, and it incorporates provisions and clauses in effect through FAC 2026-01 and DFARS Change Notice 20251110. Work Details The contract includes the following items: 1. **HEX HEAD CAP SCREW** - Quantity: 24 EA - Specifications: HEX HEAD CAP SCREW, 0.500-13UNC-2A X 6.000 IN. LG. - Manufacturing Standard: IAW ASTM A354-17 GRADE BC(MOD) - Modification: Zinc plating to be IAW ASTM B633-19 with a minimum coating thickness of 1/6 the allowance as defined in ANSI-B1.1-2003. - Material: Steel 2. **HEX HEAD SFL LKG CAP SCREW** - Quantity: 32 EA - Specifications: HEX HEAD SLF LKG CAP SCREW, 0.500-13UNC-2A X 5.000 IN. LG. - Manufacturing Standard: IAW ASTM A354-17 GRADE BC(MOD) - Modification: Zinc plating to be IAW ASTM B633-19 with a minimum coating thickness of 1/6 the allowance as defined in ANSI-B1.1-2003. - Material: Steel; Self-locking IAW MIL-DTL-18240F AMEND 1 TYPE ANY. - Markings: Minimum (6) dots (approximately 0.032 DIA) raised or depressed on the head of the fastener. 3. **HEX HEAD CAP SCREW** - Quantity: 48 EA - Specifications: HEX HEAD CAP SCREW, 0.750-10UNC-2A X 4.250 IN. LG. - Manufacturing Standard: IAW ASTM A354-17 GRADE BD. - Material: Steel 4. **HEX HEAD SFL LKG CAP SCREW** - Quantity: 24 EA - Specifications: HEX HEAD SLF LKG CAP SCREW, l.250-12UNF-2A X 4.750 IN. LG. - Manufacturing Standard: IAW ASTM A354-17 GRADE BC. - Material: Steel; Self-locking IAW MIL-DTL-18240F AMEND I TYPE ANY. - Markings as above. 5. **HEX HEAD CAP SCREW** - Quantity: 36 EA - Specifications: HEX HEAD CAP SCREW, l.250-12UNF-2A X 2.625 IN. LG. - Manufacturing Standard: IAW ASTM A354-17 GRADE BC. 6. **SOCKET HEAD SLF LKG CAP SCREW** - Quantity: 24 EA - Specifications: SOCKET HEAD SELF-LOCKING CAP SCREW, 0.500-13UNC-2A X 1.000 IN. LG. - Manufacturing Standard: IAW MIL-DTL-1222J TY II; Material is NICUAL QQ-N-286G; Self-locking IAW MIL-DTL-18240F AMEND 1 TYPE ANY. 7. **HEX HEAD CAP SCREW** - Quantity: 60 EA - Specifications: HEX HEAD CAP SCREW, 0.750-10UNC-2A X 4.2500 IN. LG.; MFR IAW ASTM A354-19 GRADE BD (MOD). 8. **SOCKET HEAD SLF LKG CAP SCREW** - Quantity: 7 EA - Specifications: SOCKET HEAD CAP SCREW, 0.500-20UNRF-3A X 3.750 IN.; MFR IAW FF-S-86J TY VI; Material is heat and corrosion-resistant steel, A286. 9 & 10.* **HEX HEAD CAP SCREWS** *Quantity*: (8 EA & 40 EA respectively) *Specifications*: Same as item #9 above (MIL-DTL specifications apply). 11 & 12.* **SOCKET HEAD CAP SCREWS** *Quantity*: (4 EA & 20 EA respectively) *Specifications*: Same as item #11 above (NICUAL QQ-N specifications apply). 13 &14.* **DATA REQUIREMENTS** *Quantity*: (1 EA each) *Specifications*: CDRL DI-MISC requirements for compliance certification. Place of Performance Portsmouth Naval Shipyard, Kittery, Maine.

Contacts

Contact name	Sam Aiguier
Contact email	sam.aiguier@dla.mil
Contact phone	(207) 438-1931
Contact fax	(207) 438-4501
Secondary contact name	DLA-KME EMAIL BOX
Secondary contact email	dla-kme-quotations@dla.mil
Secondary contact phone	None
Secondary contact fax	None