NAWCAD WOLF - Powder Batch Oven

Project ID: N0042126Q1085 FederalOpportunitiesSynopsis Solicitation

Overview

Agency	NAWC Aircraft Division
Deadline	03/09/26
Posted	03/02/26
Estimated Value	<$250,000 (solicitation indicates Simplified Acquisition Procedures, which in most cases, applies to contracts expected to be less than $250K in value)
Set Aside	Small Business
NAICS	333994 - Industrial Process Furnace and Oven Manufacturing
PSC	4430 - Industrial Furnaces, Kilns, Lehrs, And Ovens
Location	Saint Inigoes, MD 20684 United States

Description

Primary Latest Change

Summary

Posted: March 2, 2026, 1:16 p.m. EST

Solicitation Information

All quotes/responses shall be submitted via email to Maria Sproul at maria.a.sproul.civ@us.navy.mil no later than 5:00PM Eastern Standard Time on 09 March 2026. Solicitation N0042126Q1085 is issued as a combined synopsis/solicitation procurement. The Government intends to purchase on a firm fixed-price basis, and to solicit and award the proposed purchase order on a competitive basis for Powder Batch Oven, Installation and Training for items as listed, under the authority implemented by Federal Acquisition Regulation (FAR) by FAR Part 12 and Far Part 13. Offeror's must be registered in the System for Award Management Registration (SAM) database prior to submission of an offer to be considered for award of any DoD contract. This may be accomplished electronically at http://www.sam.gov. This procurement is a total set-aside for small business under the authority of FAR Part 52.219-6. ***Instructions to Offerors*** This is a firm fixed-price procurement; therefore, the offeror's initial offer should represent the vendor's best quote in terms of price and technical acceptability. Your quote will only be evaluated on the information you provide. Solicitation closing date/time is firm; proposals received after the deadline will not be accepted. Your quote must contain enough technical information i.e. data sheet, drawing, specification, etc. for evaluation. The award will be made on the basis of lowest evaluated price of qoutes meeting or exceeding the acceptability standards. A determination by the Government not to accept the quote for not meeting the minimum requirement is solely within the discretion of the Government. Please include the following information with your response: (1) FOB: (Destination preferred) (2) Shipping Cost if applicable (20684-4013): (3) IUID Labeling Cost if applicable: (4) Tax ID#: _________________ (5) Unique Entity ID #:_______________ (6) Cage Code: ________ (7) Small Business - Yes ___ No ___ (8) Estimated Delivery Date:________ (9) If available on a Price list please provide a copy. (10) Total Amount: ________________

Summary (Newest Update)

Background The Naval Air Warfare Center Aircraft Division (NAWCAD) Webster Outlying Field (WOLF) Engineering and Prototyping Facility (EPF) requires a new powder batch oven to support its production facility. The goal of this contract is to procure a Powder Batch Oven, including delivery, installation, startup, training, and manufacturer's warranty on a firm fixed-price basis. Work Details The deliverables under this contract include: One (1) Powder Batch Oven with the following specifications: - 6" thick insulated oven panels with aluminized steel skin, free standing design - 4# density mineral wool insulation - 16 gauge minimum aluminized steel trim components - Prefabricated aluminized steel corner trim sections - OEM assembled, piped, wired and end mounted burner box system - TEFC Fan Motors to be 1hp or higher - Watlow electronic temperature controller with high limit controls - New York Blower forward curve air kit - Midco HMA line burner - Filtered combustion air inlet - OEM assembled gas manifold with complete Factory Mutual (FM) approved components - One (1) preassembled double door with heavy duty hinges and explosion relief lathes - Ceiling mounted aluminized steel ductwork with adjustable nozzles and flanged connections - New York Blower exhaust fan with TEFC motor and adjustable v-belt drive - UL-Listed control panel with Dongan ignition transformer - Honeywell flame safeguard system with UV flame scanner - Allen Bradley main disconnect and associated electrical components - Batch Timer (digital) with Allen Bradley alarm horn - Three (3) Dwyer air flow switches and Two (2) Type 'J' thermocouple assemblies. Additionally, the oven must meet various codes and design standards such as AMCA - 211 certified performance on safety ventilation fans and UL / Cul listed control panels. The maximum operating temperature is 450 F, requiring specific electrical services of 460V / 3PH / 60Hz. Period of Performance Delivery of the items shall be completed no later than 180 calendar days after receipt of order. Place of Performance The products will be delivered to the NAWCAD WOLF EPF.

2: Posted: March 4, 2026, 2:42 p.m. EST SEE ATTACHMENT FOR QUESTIONS AND ANSWERS ADDED. ******************************************************************************************************************* Solicitation Information All quotes/responses shall be submitted via email to Maria Sproul at maria.a.sproul.civ@us.navy.mil no later than 5:00PM Eastern Standard Time on 09 March 2026. Solicitation N0042126Q1085 is issued as a combined synopsis/solicitation procurement. The Government intends to purchase on a firm fixed-price basis, and to solicit and award the proposed purchase order on a competitive basis for Powder Batch Oven, Installation and Training for items as listed, under the authority implemented by Federal Acquisition Regulation (FAR) by FAR Part 12 and Far Part 13. Offeror's must be registered in the System for Award Management Registration (SAM) database prior to submission of an offer to be considered for award of any DoD contract. This may be accomplished electronically at http://www.sam.gov. This procurement is a total set-aside for small business under the authority of FAR Part 52.219-6. ***Instructions to Offerors*** This is a firm fixed-price procurement; therefore, the offeror's initial offer should represent the vendor's best quote in terms of price and technical acceptability. Your quote will only be evaluated on the information you provide. Solicitation closing date/time is firm; proposals received after the deadline will not be accepted. Your quote must contain enough technical information i.e. data sheet, drawing, specification, etc. for evaluation. The award will be made on the basis of lowest evaluated price of qoutes meeting or exceeding the acceptability standards. A determination by the Government not to accept the quote for not meeting the minimum requirement is solely within the discretion of the Government. Please include the following information with your response: (1) FOB: (Destination preferred) (2) Shipping Cost if applicable (20684-4013): (3) IUID Labeling Cost if applicable: (4) Tax ID#: _________________ (5) Unique Entity ID #:_______________ (6) Cage Code: ________ (7) Small Business - Yes ___ No ___ (8) Estimated Delivery Date:________ (9) If available on a Price list please provide a copy. (10) Total Amount: ________________

Current: Posted: March 5, 2026, 1:57 p.m. EST SEE REVISED QUESTIONS AND ANSWERS DOCUMENT. **************************************************************************** SEE ATTACHMENT FOR QUESTIONS AND ANSWERS ADDED. ******************************************************************************************************************* Solicitation Information All quotes/responses shall be submitted via email to Maria Sproul at maria.a.sproul.civ@us.navy.mil no later than 5:00PM Eastern Standard Time on 09 March 2026. Solicitation N0042126Q1085 is issued as a combined synopsis/solicitation procurement. The Government intends to purchase on a firm fixed-price basis, and to solicit and award the proposed purchase order on a competitive basis for Powder Batch Oven, Installation and Training for items as listed, under the authority implemented by Federal Acquisition Regulation (FAR) by FAR Part 12 and Far Part 13. Offeror's must be registered in the System for Award Management Registration (SAM) database prior to submission of an offer to be considered for award of any DoD contract. This may be accomplished electronically at http://www.sam.gov. This procurement is a total set-aside for small business under the authority of FAR Part 52.219-6. ***Instructions to Offerors*** This is a firm fixed-price procurement; therefore, the offeror's initial offer should represent the vendor's best quote in terms of price and technical acceptability. Your quote will only be evaluated on the information you provide. Solicitation closing date/time is firm; proposals received after the deadline will not be accepted. Your quote must contain enough technical information i.e. data sheet, drawing, specification, etc. for evaluation. The award will be made on the basis of lowest evaluated price of qoutes meeting or exceeding the acceptability standards. A determination by the Government not to accept the quote for not meeting the minimum requirement is solely within the discretion of the Government. Please include the following information with your response: (1) FOB: (Destination preferred) (2) Shipping Cost if applicable (20684-4013): (3) IUID Labeling Cost if applicable: (4) Tax ID#: _________________ (5) Unique Entity ID #:_______________ (6) Cage Code: ________ (7) Small Business - Yes ___ No ___ (8) Estimated Delivery Date:________ (9) If available on a Price list please provide a copy. (10) Total Amount: ________________

Contacts