Gage Lab Calibration Services & Repairs

3: Posted: March 5, 2026, 3:11 p.m. EST This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes only the solicitation; proposals are being requested, and a formal solicitation will NOT be issued. This is a Request for Proposal (RFP) using FAR Part 12, Acquisition of Commercial Items; the Solicitation Number is W519TC26QCALI for the AQA Gage Lab Calibration & Repair Services. The solicitation and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-06. The NAICS code for this procurement is 811210 (Electronic & Precision Equipment Repair & Maintenance). The small business size standard for this NAICS is $34,000,000. The Product Service Code is J066 (Industrial Products Install, Maintenance, & Repair: Instruments & Laboratory Equipment). Offerors must be registered within the System for Award Management (SAM) databased at time of response to this solicitation. The website for SAM is https://www.sam.gov/. ADDENDUM TO 52.212-1, INSTRUCTIONS TO OFFERORS COMMERCIAL DESCRIPTION OF REQUIREMENT This requirement is for one Base Year and one Option Year. The Period of Performance for the Base Year will be from the date of award through 365 days after the date of award. The Period of Performance for the Option Year 1 will be 366 days after award through 731 after the date of award. The CLIN structure can be found below: CLIN Quantity/ UoM Notes 0001 Testing of Current Gages (Base Year) 1 Lot N/A 0002 Calibration of Current Gages (Base Year) 1 Lot 1 Lot = 3,333 each. 3,000-3,300 of the entire Lot will be calibrated yearly. 150 of the entire Lot will be calibrated bi-annually. 0003 Purchase of New Gages (Base Year) 1 Lot N/A 0004 Newly Purchased Gage Calibration (Base Year) 1 Lot N/A 0005 Failed Calibrations (Base Year) 1 Lot This CLIN encompasses the cost of all possible remediations after initial calibration/ repairs/ adjustments, prior to the determination of gage failure. 0006 CDRL (Base Year) 1 Lot NSP 1001 Testing of Current Gages Option Year 1 1 Lot N/A 1002 Calibration of Current Gages (Option Year 1) 1 Lot 1 Lot = 3,333 each. 3,000-3,300 of the entire Lot will be calibrated yearly. 150 of the entire Lot will be calibrated bi-annually. 1003 Purchase of New Gages (Option Year 1) 1 Lot N/A 1004 Newly Purchased Gage Calibration (Option Year 1) 1 Lot N/A 1005 Failed Calibrations (Option Year 1) 1 Lot This CLIN encompasses the cost of all possible remediations after initial calibration/ repairs/ adjustments, prior to the determination of gage failure. 1006 CDRL (Option Year 1) 1 Lot NSP NOTE: See Attachment 0001 Performance Work Statement; Gage Calibration dated 26 February 2026, and Attachment 0002 Gage Calibration Item List for more information dated 26 February 2026. Contract Data Requirements List (CDRL): Refer to Attachment 0004 DD Forms 1423 (CDRLS) for information pertaining to each individual CDRL. TYPE OF ACQUISITION AND CONTRACT This acquisition is issued as a Small Business Set Aside. Award will be made as best value to the Government using a trade-off process, resulting in a single award Firm Fixed Price Purchase Order. PLACE OF PERFORMANCE Performance will be FOB Destination at the following: Crane Army Ammunition Activity Building 3295 300 Highway 361 Crane, IN 47522-5001 PROPOSAL SUBMISSION REQUIREMENTS Offerors SHALL submit the following in response to this solicitation: Price Offerors must submit Completed Pricing Matrix at Attachment 0005. All yellow-highlighted sections in each of the three (3) tabs shall be completed. Prices shall be stated to 2 decimal places. Completed Gage Calibration Questionnaire at Attachment 0006. A technical capability statement/ brochure/ attachment of previously worked on contracts related to gage calibration. * This information must include the company's skills, areas, and how they intend to meet the PWS requirements. A copy of the Laboratory Accreditation Certificate(s), showing accreditation to ISO/IEC 17025. Certificates must be provided for all laboratories that will be performing calibration services. BASIS FOR AWARD In accordance with FAR 52.212-1(g), the Government intends to award one (1) Purchase Order to the offer who submits a responsive proposal that provides the best value to the Government using a trade-off process. Best Value The expected outcome of the acquisition that, in the Government's estimation, provides the greatest overall benefit in response to the requirement. Tradeoff The Government may accept other than the lowest priced proposal when the decision is consistent with the evaluation criteria, and the Government reasonably determines that the perceived benefits of a higher priced proposal warrants the increase in price. The Government has established Technical and Price as the evaluation factors. The order of importance is as follows: Factor 1: Technical is more important than Price Factor 2: Price is not expected to be the controlling criterion in the selection, but price importance will increase as the differences between the evaluation results for the technical criterion decrease. Proposals are intended to be evaluated and the award made without discussion, unless interchanges are determined necessary. EVALUATION CRITERIA FACTOR 1: TECHNICAL Quoters shall submit a technical capability statement/ brochure/ attachment of previously worked on contracts related to gage calibration. Based on the information provided, a rating of Acceptable or Unacceptable will be assigned as follows: Acceptable: Proposal meets the requirements of the solicitation Unacceptable: Proposal does not meet the requirements of the solicitation FACTOR 2: PRICE Quoters shall adhere to the instructions on the Government provided Pricing Matrix (Attachment 0005) and fully complete all required fields in the three (3) tabs. Failure to comply with any pricing instruction included in this solicitation may render the proposal ineligible for award. The price proposed will be evaluated to determine reasonableness. In accordance with FAR 31.201-3, a price is reasonable if, in its nature and amount, it does not exceed that which would be incurred by a prudent person in the conduct of competitive business. LISTING OF ATTACHMENTS Attachment 0001 Performance Work Statement; Gage Calibration; 26 February 2026 Attachment 0002 Gage Calibration Item List; 26 February 2026 Attachment 0003 Wage Determination No.: 2015 -4821 Revision 31; 02December2025 Attachment 0004 DD Forms 1423 (CDRLS) Attachment 0005 Price Matrix; 26FEB2026 Attachment 0006 Gage Calibration Questionnaire Attachment 0007 - Provisions and Clauses - Gage Calibration DEADLINE FOR SUBMISSION Offers are due on 12 March 2026 no later than 12:30 PM Central Time. Offers shall be submitted in the following way: Electronically via email to the Contract Specialist, Bridget Garnica, bridget.m.garnica.civ@army.mil and Contracting Officer, Bryce Willett, bryce.t.willett.civ@army.mil. Offerors shall include W519TC26QCALI Response [Insert Offeror's Name] within the Subject line. QUESTIONS Questions shall be submitted in the same manner as Offers, electronically via email to the Contract Specialist and Contracting Officer listed above. **Note: Interested offerors must submit any questions concerning this solicitation at the earliest time possible, to enable the Buyer to respond. Questions not received 72 hours prior to the closure of the solicitation may not be considered. End of Addendum 52.212-1 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- AMENDMENT 0001 Amendment 0001 to solicitation W519TC26QCALI has been executed as of 27 February 2026. Amendment 0001 is to update Attachment 0005 - Pricing Matrix and can be found in the list of attachments. The closing date for this solicitation remains the same. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- AMENDMENT 0002 Amendment 0002 to solicitation W519TC26QCALI has been executed as of 05 March 2026. Amendment 0002 is to incorporate additional questions and answers and can be found in the list of attachments associated with the solicitation titled "W519TC26QCALI Gage Lab Calibration_QAs_05MAR2026." The closing date for this solicitation remains the same.

4: Posted: March 9, 2026, 12:35 p.m. EDT This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes only the solicitation; proposals are being requested, and a formal solicitation will NOT be issued. This is a Request for Proposal (RFP) using FAR Part 12, Acquisition of Commercial Items; the Solicitation Number is W519TC26QCALI for the AQA Gage Lab Calibration & Repair Services. The solicitation and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-06. The NAICS code for this procurement is 811210 (Electronic & Precision Equipment Repair & Maintenance). The small business size standard for this NAICS is $34,000,000. The Product Service Code is J066 (Industrial Products Install, Maintenance, & Repair: Instruments & Laboratory Equipment). Offerors must be registered within the System for Award Management (SAM) databased at time of response to this solicitation. The website for SAM is https://www.sam.gov/. ADDENDUM TO 52.212-1, INSTRUCTIONS TO OFFERORS COMMERCIAL DESCRIPTION OF REQUIREMENT This requirement is for one Base Year and one Option Year. The Period of Performance for the Base Year will be from the date of award through 365 days after the date of award. The Period of Performance for the Option Year 1 will be 366 days after award through 731 after the date of award. The CLIN structure can be found below: CLIN Quantity/ UoM Notes 0001 Testing of Current Gages (Base Year) 1 Lot N/A 0002 Calibration of Current Gages (Base Year) 1 Lot 1 Lot = 3,333 each. 3,000-3,300 of the entire Lot will be calibrated yearly. 150 of the entire Lot will be calibrated bi-annually. 0003 Purchase of New Gages (Base Year) 1 Lot N/A 0004 Newly Purchased Gage Calibration (Base Year) 1 Lot N/A 0005 Failed Calibrations (Base Year) 1 Lot This CLIN encompasses the cost of all possible remediations after initial calibration/ repairs/ adjustments, prior to the determination of gage failure. 0006 CDRL (Base Year) 1 Lot NSP 1001 Testing of Current Gages Option Year 1 1 Lot N/A 1002 Calibration of Current Gages (Option Year 1) 1 Lot 1 Lot = 3,333 each. 3,000-3,300 of the entire Lot will be calibrated yearly. 150 of the entire Lot will be calibrated bi-annually. 1003 Purchase of New Gages (Option Year 1) 1 Lot N/A 1004 Newly Purchased Gage Calibration (Option Year 1) 1 Lot N/A 1005 Failed Calibrations (Option Year 1) 1 Lot This CLIN encompasses the cost of all possible remediations after initial calibration/ repairs/ adjustments, prior to the determination of gage failure. 1006 CDRL (Option Year 1) 1 Lot NSP NOTE: See Attachment 0001 Performance Work Statement; Gage Calibration dated 26 February 2026, and Attachment 0002 Gage Calibration Item List for more information dated 26 February 2026. Contract Data Requirements List (CDRL): Refer to Attachment 0004 DD Forms 1423 (CDRLS) for information pertaining to each individual CDRL. TYPE OF ACQUISITION AND CONTRACT This acquisition is issued as a Small Business Set Aside. Award will be made as best value to the Government using a trade-off process, resulting in a single award Firm Fixed Price Purchase Order. PLACE OF PERFORMANCE Performance will be FOB Destination at the following: Crane Army Ammunition Activity Building 3295 300 Highway 361 Crane, IN 47522-5001 PROPOSAL SUBMISSION REQUIREMENTS Offerors SHALL submit the following in response to this solicitation: Price Offerors must submit Completed Pricing Matrix at Attachment 0005. All yellow-highlighted sections in each of the three (3) tabs shall be completed. Prices shall be stated to 2 decimal places. Completed Gage Calibration Questionnaire at Attachment 0006. A technical capability statement/ brochure/ attachment of previously worked on contracts related to gage calibration. * This information must include the company's skills, areas, and how they intend to meet the PWS requirements. A copy of the Laboratory Accreditation Certificate(s), showing accreditation to ISO/IEC 17025. Certificates must be provided for all laboratories that will be performing calibration services. BASIS FOR AWARD In accordance with FAR 52.212-1(g), the Government intends to award one (1) Purchase Order to the offer who submits a responsive proposal that provides the best value to the Government using a trade-off process. Best Value The expected outcome of the acquisition that, in the Government's estimation, provides the greatest overall benefit in response to the requirement. Tradeoff The Government may accept other than the lowest priced proposal when the decision is consistent with the evaluation criteria, and the Government reasonably determines that the perceived benefits of a higher priced proposal warrants the increase in price. The Government has established Technical and Price as the evaluation factors. The order of importance is as follows: Factor 1: Technical is more important than Price Factor 2: Price is not expected to be the controlling criterion in the selection, but price importance will increase as the differences between the evaluation results for the technical criterion decrease. Proposals are intended to be evaluated and the award made without discussion, unless interchanges are determined necessary. EVALUATION CRITERIA FACTOR 1: TECHNICAL Quoters shall submit a technical capability statement/ brochure/ attachment of previously worked on contracts related to gage calibration. Based on the information provided, a rating of Acceptable or Unacceptable will be assigned as follows: Acceptable: Proposal meets the requirements of the solicitation Unacceptable: Proposal does not meet the requirements of the solicitation FACTOR 2: PRICE Quoters shall adhere to the instructions on the Government provided Pricing Matrix (Attachment 0005) and fully complete all required fields in the three (3) tabs. Failure to comply with any pricing instruction included in this solicitation may render the proposal ineligible for award. The price proposed will be evaluated to determine reasonableness. In accordance with FAR 31.201-3, a price is reasonable if, in its nature and amount, it does not exceed that which would be incurred by a prudent person in the conduct of competitive business. LISTING OF ATTACHMENTS Attachment 0001 Performance Work Statement; Gage Calibration; 26 February 2026 Attachment 0002 Gage Calibration Item List; 26 February 2026 Attachment 0003 Wage Determination No.: 2015 -4821 Revision 31; 02December2025 Attachment 0004 DD Forms 1423 (CDRLS) Attachment 0005 Price Matrix; 26FEB2026 Attachment 0006 Gage Calibration Questionnaire Attachment 0007 - Provisions and Clauses - Gage Calibration DEADLINE FOR SUBMISSION Offers are due on 12 March 2026 no later than 12:30 PM Central Time. Offers shall be submitted in the following way: Electronically via email to the Contract Specialist, Bridget Garnica, bridget.m.garnica.civ@army.mil and Contracting Officer, Bryce Willett, bryce.t.willett.civ@army.mil. Offerors shall include W519TC26QCALI Response [Insert Offeror's Name] within the Subject line. QUESTIONS Questions shall be submitted in the same manner as Offers, electronically via email to the Contract Specialist and Contracting Officer listed above. **Note: Interested offerors must submit any questions concerning this solicitation at the earliest time possible, to enable the Buyer to respond. Questions not received 72 hours prior to the closure of the solicitation may not be considered. End of Addendum 52.212-1 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- AMENDMENT 0001 Amendment 0001 to solicitation W519TC26QCALI has been executed as of 27 February 2026. Amendment 0001 is to update Attachment 0005 - Pricing Matrix and can be found in the list of attachments. The closing date for this solicitation remains the same. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- AMENDMENT 0002 Amendment 0002 to solicitation W519TC26QCALI has been executed as of 05 March 2026. Amendment 0002 is to incorporate additional questions and answers and can be found in the list of attachments associated with the solicitation titled "W519TC26QCALI Gage Lab Calibration_QAs_05MAR2026." The closing date for this solicitation remains the same. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- AMENDMENT 0003 Amendment 0003 to solicitation W519TC26QCALI has been executed as of 09 March 2026. Amendment 0003 is to incorporate additional questions and answers and can be found in the list of attachments associated with the solicitation titled "W519TC26QCALI Gage Lab Calibration_QAs_09MAR2026." The closing date for this solicitation remains the same. The closing date is 12 March 2026 at 12:30 PM Central Time.

Current: Posted: March 9, 2026, 3:24 p.m. EDT This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes only the solicitation; proposals are being requested, and a formal solicitation will NOT be issued. This is a Request for Proposal (RFP) using FAR Part 12, Acquisition of Commercial Items; the Solicitation Number is W519TC26QCALI for the AQA Gage Lab Calibration & Repair Services. The solicitation and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-06. The NAICS code for this procurement is 811210 (Electronic & Precision Equipment Repair & Maintenance). The small business size standard for this NAICS is $34,000,000. The Product Service Code is J066 (Industrial Products Install, Maintenance, & Repair: Instruments & Laboratory Equipment). Offerors must be registered within the System for Award Management (SAM) databased at time of response to this solicitation. The website for SAM is https://www.sam.gov/. ADDENDUM TO 52.212-1, INSTRUCTIONS TO OFFERORS COMMERCIAL DESCRIPTION OF REQUIREMENT This requirement is for one Base Year and one Option Year. The Period of Performance for the Base Year will be from the date of award through 365 days after the date of award. The Period of Performance for the Option Year 1 will be 366 days after award through 731 after the date of award. The CLIN structure can be found below: CLIN Quantity/ UoM Notes 0001 Testing of Current Gages (Base Year) 1 Lot N/A 0002 Calibration of Current Gages (Base Year) 1 Lot 1 Lot = 3,333 each. 3,000-3,300 of the entire Lot will be calibrated yearly. 150 of the entire Lot will be calibrated bi-annually. 0003 Purchase of New Gages (Base Year) 1 Lot N/A 0004 Newly Purchased Gage Calibration (Base Year) 1 Lot N/A 0005 Failed Calibrations (Base Year) 1 Lot This CLIN encompasses the cost of all possible remediations after initial calibration/ repairs/ adjustments, prior to the determination of gage failure. 0006 CDRL (Base Year) 1 Lot NSP 1001 Testing of Current Gages Option Year 1 1 Lot N/A 1002 Calibration of Current Gages (Option Year 1) 1 Lot 1 Lot = 3,333 each. 3,000-3,300 of the entire Lot will be calibrated yearly. 150 of the entire Lot will be calibrated bi-annually. 1003 Purchase of New Gages (Option Year 1) 1 Lot N/A 1004 Newly Purchased Gage Calibration (Option Year 1) 1 Lot N/A 1005 Failed Calibrations (Option Year 1) 1 Lot This CLIN encompasses the cost of all possible remediations after initial calibration/ repairs/ adjustments, prior to the determination of gage failure. 1006 CDRL (Option Year 1) 1 Lot NSP NOTE: See Attachment 0001 Performance Work Statement; Gage Calibration dated 26 February 2026, and Attachment 0002 Gage Calibration Item List for more information dated 26 February 2026. Contract Data Requirements List (CDRL): Refer to Attachment 0004 DD Forms 1423 (CDRLS) for information pertaining to each individual CDRL. TYPE OF ACQUISITION AND CONTRACT This acquisition is issued as a Small Business Set Aside. Award will be made as best value to the Government using a trade-off process, resulting in a single award Firm Fixed Price Purchase Order. PLACE OF PERFORMANCE Performance will be FOB Destination at the following: Crane Army Ammunition Activity Building 3295 300 Highway 361 Crane, IN 47522-5001 PROPOSAL SUBMISSION REQUIREMENTS Offerors SHALL submit the following in response to this solicitation: Price Offerors must submit Completed Pricing Matrix at Attachment 0005. All yellow-highlighted sections in each of the three (3) tabs shall be completed. Prices shall be stated to 2 decimal places. Completed Gage Calibration Questionnaire at Attachment 0006. A technical capability statement/ brochure/ attachment of previously worked on contracts related to gage calibration. * This information must include the company's skills, areas, and how they intend to meet the PWS requirements. A copy of the Laboratory Accreditation Certificate(s), showing accreditation to ISO/IEC 17025. Certificates must be provided for all laboratories that will be performing calibration services. BASIS FOR AWARD In accordance with FAR 52.212-1(g), the Government intends to award one (1) Purchase Order to the offer who submits a responsive proposal that provides the best value to the Government using a trade-off process. Best Value The expected outcome of the acquisition that, in the Government's estimation, provides the greatest overall benefit in response to the requirement. Tradeoff The Government may accept other than the lowest priced proposal when the decision is consistent with the evaluation criteria, and the Government reasonably determines that the perceived benefits of a higher priced proposal warrants the increase in price. The Government has established Technical and Price as the evaluation factors. The order of importance is as follows: Factor 1: Technical is more important than Price Factor 2: Price is not expected to be the controlling criterion in the selection, but price importance will increase as the differences between the evaluation results for the technical criterion decrease. Proposals are intended to be evaluated and the award made without discussion, unless interchanges are determined necessary. EVALUATION CRITERIA FACTOR 1: TECHNICAL Quoters shall submit a technical capability statement/ brochure/ attachment of previously worked on contracts related to gage calibration. Based on the information provided, a rating of Acceptable or Unacceptable will be assigned as follows: Acceptable: Proposal meets the requirements of the solicitation Unacceptable: Proposal does not meet the requirements of the solicitation FACTOR 2: PRICE Quoters shall adhere to the instructions on the Government provided Pricing Matrix (Attachment 0005) and fully complete all required fields in the three (3) tabs. Failure to comply with any pricing instruction included in this solicitation may render the proposal ineligible for award. The price proposed will be evaluated to determine reasonableness. In accordance with FAR 31.201-3, a price is reasonable if, in its nature and amount, it does not exceed that which would be incurred by a prudent person in the conduct of competitive business. LISTING OF ATTACHMENTS Attachment 0001 Performance Work Statement; Gage Calibration; 26 February 2026 Attachment 0002 Gage Calibration Item List; 26 February 2026 Attachment 0003 Wage Determination No.: 2015 -4821 Revision 31; 02December2025 Attachment 0004 DD Forms 1423 (CDRLS) Attachment 0005 Price Matrix; 26FEB2026 Attachment 0006 Gage Calibration Questionnaire Attachment 0007 - Provisions and Clauses - Gage Calibration DEADLINE FOR SUBMISSION Offers are due on 12 March 2026 no later than 12:30 PM Central Time. Offers shall be submitted in the following way: Electronically via email to the Contract Specialist, Bridget Garnica, bridget.m.garnica.civ@army.mil and Contracting Officer, Bryce Willett, bryce.t.willett.civ@army.mil. Offerors shall include W519TC26QCALI Response [Insert Offeror's Name] within the Subject line. QUESTIONS Questions shall be submitted in the same manner as Offers, electronically via email to the Contract Specialist and Contracting Officer listed above. **Note: Interested offerors must submit any questions concerning this solicitation at the earliest time possible, to enable the Buyer to respond. Questions not received 72 hours prior to the closure of the solicitation may not be considered. End of Addendum 52.212-1 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- AMENDMENT 0001 Amendment 0001 to solicitation W519TC26QCALI has been executed as of 27 February 2026. Amendment 0001 is to update Attachment 0005 - Pricing Matrix and can be found in the list of attachments. The closing date for this solicitation remains the same. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- AMENDMENT 0002 Amendment 0002 to solicitation W519TC26QCALI has been executed as of 05 March 2026. Amendment 0002 is to incorporate additional questions and answers and can be found in the list of attachments associated with the solicitation titled "W519TC26QCALI Gage Lab Calibration_QAs_05MAR2026." The closing date for this solicitation remains the same. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- AMENDMENT 0003 Amendment 0003 to solicitation W519TC26QCALI has been executed as of 09 March 2026. Amendment 0003 is to incorporate additional questions and answers and can be found in the list of attachments associated with the solicitation titled "W519TC26QCALI Gage Lab Calibration_QAs_09MAR2026." The closing date for this solicitation remains the same. The closing date is 12 March 2026 at 12:30 PM Central Time. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- AMENDMENT 0004 Amendment 0004 to solicitation W519TC26QCALI has been executed as of 09 March 2026. Amendment 0004 is to incorporate additional questions and answers and can be found in the list of attachments associated with the solicitation titled "W519TC26QCALI Gage Lab Calibration_QAs v2_09MAR2026." The closing date for this solicitation remains the same. The closing date is 12 March 2026 at 12:30 PM Central Time.